I-BEAM

In our production facility there is also manufacture of certified I-beam in length from 1.00 m to 6.40 m for making lmt-ceiling between floor constructions. Roof beams are supporting elements so that they must meet certain static conditions. Addition to the basic reinforced structures, which consists of a truss (3xr7), with a range greater than 4m incorporating the additional reinforcement ra 400/500, reinforcement is calculated for constant load g = 4, 80kn/m2 and usefull load = 2.0 kN/m2.


Floor structure made of beams are commonly used in residential construction, where is static load, and may not apply if there is a dynamic load (machine) because they may fracture construction. I-beams are set in the wheelbase of 40cm, as well as filling in this system of construction it is used roof restoration "y" height h=14cm or
h=16cm.
 

lmt – ceiling advantages

  • Quick and easy installation without the shell with minimal support
  • Good sound and thermal insulation
  • lmt-system has 3x bigger safety factor than the system with clasic montage
  • Easier handling, storage and transport. In our warehouses there is also lager beams from 30 000m to 40 000m, which enables fast and efficient delivery lmt - carriers.
     
I-BEAM 1
I-BEAM 1

I-BEAM 2
I-BEAM 2

I-BEAM 3
I-BEAM 3

I-BEAM 4
I-BEAM 4

I-BEAM 5
I-BEAM 5

I-BEAM 6
I-BEAM 6

I-BEAM 7
I-BEAM 7

I-BEAM 8
I-BEAM 8

I-BEAM 9
I-BEAM 9

I-BEAM
I-BEAM


ŠEVO TIM d.o.o.
R. Todorovića 20, 11260 Umka
tel: 063/345-100, fax:011/8026-004
Copyright© 2009
design by Normareclamare